New at RisingTuning, the KEIN front fender reinforcement brace kit for Subaru Impreza 1st generation (1992-2000).
First introduced in Japan and developed specifically for motorsport competition, these braces are also known as "Gacchiri Support".
KEIN fender braces are designed to suppress deformation of the front frame by mounting it to the inner fender frame - thereby adding rigidity to the body.
It minimizes body deformation during sporty driving styles and when cornering, it increases suspension and suspension efficiency and improves handling.
KEIN fender brace kit is designed specifically for motorsports, the development of the brace was based on the principle: ultra-lightness and maximum rigidity.
And also as one of the bonuses of the front fender brace: It is a compensation and overall improvement of the stiffness of the body "tired metal", especially relevant for bodies that are more than 10 years old. So you can slow down the aging of the body and not only lose the factory characteristics but also increase them.

Item content:
• KEIN Fender Brace kit for Subaru Impreza 1st gen - 2 pcs. (Left & Right)
• Fasteners included

Advantages:
• Significant Improvement in overall vehicle handling
• Increased steering responsiveness
• Significantly reduces body flex in corners and over bumps
• Compensates and improves the stiffness of the old body (removes "tired metal" properties)
• Increases the overall strength of the body's power components at the front of the vehicle through 8 connection points.

Features:
• Bolt-on
• Material: Steel
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc
• Tested on the track and on the street.

Installation:
Mounts under the front fender, attaches to the door hinges and OEM mounting points of the factory strut, replacing it with a rigid triangular structure.
Remove these standard fender reinforcements when present on the vehicle on WRX / WRX STI versions (OEM parts), to install KEIN power fender spacers:
Right: 57121AA001
Left: 57121AA011

Weight: 3.1kg.

This fender braces is compatible with this cars:

Short: All Subaru Impreza 1st gen, 1992-2000 (GC, GF, GM)

SUBARU IMPREZA (STOCK)

Europe & World:
Subaru Impreza [GF|G10], 1 Gen, Wagon, 06.1992 - 12.1996, Body: GF4, GF6
Subaru Impreza [GF|G10], 1 Gen Facelift, Wagon, 06.1996 - 12.2000, Body: GF4, GF8, GF8LD
Subaru Impreza [GC|G10], 1 Gen, Sedan, 06.1992 - 12.1996, Body: GC4, GC6
Subaru Impreza [GC|G10], 1 Gen Facelift, Sedan, 06.1996 - 12.2000, Body: GC4, GC8, GC8LD

Japan & World:
Subaru Impreza [GC|G10], 1 Gen, Sedan, 11.1992 - 08.1996, Body: GC1, GC4, GC6
Subaru Impreza [GC|G10], 1 Gen, Coupe, 11.1992 - 08.1996, Body: GC1, GC4
Subaru Impreza [GC|G10], 1 Gen Facelift, Sedan, 09.1996 - 07.2000, Body: GC1, GC2, GC8
Subaru Impreza [GF|G10], 1 Gen, Wagon, 11.1992 - 08.1996, Body: GF1, GF3, GF4, GF6, GFA
Subaru Impreza [GF|G10], 1 Gen Facelift, Wagon, 09.1996 - 07.2000, Body: GF1, GF2, GF5, GF6, GF8

SUBARU IMPREZA WRX 

Europe & World:
Subaru Impreza WRX [GC|G10], 1 Gen, Sedan, 06.1996 - 12.2000, Body: GC8LD3
Subaru Impreza WRX [GF|G10], 1 Gen, Wagon, 06.1996 - 12.2000, Body: GF8LD3

Japan & World:
Subaru Impreza WRX [GC|G10], 1 Gen, Sedan, 11.1992 - 08.1996, Body: GC8
Subaru Impreza WRX [GC|G10], 1 Gen Facelift, Sedan, 09.1996 - 07.2000, Body: GC8
Subaru Impreza WRX [GF|G10], 1 Gen, Wagon, 11.1992 - 08.1996, Body: GF8
Subaru Impreza WRX [GF|G10], 1 Gen Facelift, Wagon, 09.1996 - 07.2000, Body: GF8

SUBARU IMPREZA WRX STI

Japan & World:
Subaru Impreza WRX STI [GC|G10], 1 Gen, Sedan, 01.1994 - 08.1996, Body: GC8
Subaru Impreza WRX STI [GC|G10], 1 Gen Facelift, Sedan, 09.1996 - 09.2000, Body: GC8
Subaru Impreza WRX STI [GF|G10], 1 Gen, Wagon, 01.1994 - 08.1996, Body: GF8
Subaru Impreza WRX STI [GF|G10], 1 Gen Facelift, Wagon, 09.1996 - 09.2000, Body: GF8
Subaru Impreza WRX STI [GM, GC|G10], 1 Gen Facelift, Coupe, 01.1997 - 09.2000, Body: GC8

Years of issue Impreza: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the cars are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.